Payment & Shipping Terms:
|Name:||Water Ring Vacuum Pump||Material:||Cast Iron/stainless Steel|
|Power:||15kw||Minimum Suction Pressure:||33mbar|
2BE1 Series Single-Stage single-role Cast Iron Water Ring Vacuum Pump
Main Characteristics of the Roots Pump
· It has larger suction capacity in the wider pressure range(1~1*104Pa).
· There is no oil in the pump chamber, so the pollution of the oil vapor is avoided. ·It has less libration and lower noise.
· It has less mechanical attrition and drive power.
· It is easy to repair and mantanance, so it has lower mantanance charges and longer usage life. ·It can pump the coagulated gases.
· It can not be used separately, a fore pump is needed. Under the atmosphere, it is not allowed to start directly until the inlet pressure reaches the definite pressure that obtained by the fore pump. The water ring vacuum pump, the oil ring vacuum pump and oil seal mechanical pump can be used as the fore pump.
Technical parameters :
2SK series double-stage liquid ring vacuum pump
|rotary speed(r.p.m)||supplied water amoun(L/min)||caliber of the suction port and drain port|
|max||when the suction pressure is －0.093Mpa, it is no less than||mmHg||MPa|
2Sk-P1 series double-stage liquid ring vacuum pump------air ejecting pump unit
|type||suction amount(m3/min)||utmost pressure||power
|rotary speed(r.p.m)||supplied water amoun(L/min)||pump body material|
|when the suction pressure is －0.093Mpa(-700mmHg)||when the suction pressure is －0.097Mpa(-700mmHg)||when the suction pressure is －0.099Mpa(-700mmHg)||mmHg||MPa|
1. The value in the table is obtained under the following condition: air pressure is 0.1013Mpa760mmHg; inlet water temperature is 20; relative air humidity is 70.
2. The value is obtained when the supplied water amount is the suction pressure 0.05Mpa(400mmHg). It can be bigger than this when it reaches utmost vacuum.
3. The performance difference will not exceed ±10