Payment & Shipping Terms:
|Device:||Gear Type Oil Delivery Pump||Inlet Range:||3/4inch To 14inch|
|Outlet Range:||3/4inch To 14inch||Flow Range:||1.1 To 150m³/h|
|Discharge Pressure:||0.13 To 1.45 Mpa||Motor Type:||Electric And Diesel|
Stainless Steel Gear Oil Pump Lubricating Oil Pump Easy Operation / Maintenance
Scope of application:
It can used as the transfer and booster pump in the fuel transfer system;
It can used as the fuel pump to transport, pressurize and spray in the fuel system;
It can be used as hydraulic pump to provide hydraulic power for hydraulic drive system;
It can be used as lubricating oil pump in all industries.
The series gear pump is made up of gear, shaft, pump casing, pump cover, bearing sleeve and axle head seal etc. The gear has higher hardness and wear resistance after nitriding treatment. The gear mounted together with the shaft operating inside the shaft sleeve replaceable. The lubrication of all parts can be finished automatically when conveying the medium during the working time.
Four bearing sleeves in the pump floating installation to adjust the end gap automatically according to working pressure, resulting in stable pump pressure, small output flow pulsation and high volumetric efficiency.
2CY series gear oil pump has the characteristics of simple and practical structure, easy to use and maintenance. 2CY gear oil pump is equipped with safety valve to protect the motor when the pump is overloaded.
The safety valve of the product specification for above KCB-200 have been changed into the relief valve. In tat case, the working pressure can be adjusted arbitrar.
|Model||Capacity Q||Speed||Exhaust Pressure||NPSHR||Efficiency||Motor|
1. The reading of the pressure meter and vacuum gauge should be in the range of the technological parameter;
2. Check whether the gland box has leakage. According to the actual situation, tighten the packing gland; (The packing gland should not be screwed too tight in case the gland box gets heated and seal ring wears quickly.)
3. When abnormal noise occurs or the pump gets highly heated during the working, should stop it to check the problem immediately;
4. Generally, the safe valves should not be adjusted. Otherwise, use the instruments to correct it. The pressure to seal the valves of KCB‐18.3 and KCB‐33.3 is 1.7 MPa, 0.45 MPa for KCB‐55, KCB‐83.3, KCB‐300, KCB‐483.3. The pressure for three KCB‐200 are 0.45 MPa, 0.8 MPa, 1.4 MPa. The pressure for 2CY100/3, 2CY120/3, 2CY150/7 are 0.45 MPa and 0.8 MPa.
** Providing more details about your requirement such as flow, head, motor, medium and the like, you will get more correct products and price.
"Quick and effective service" is the orientation of Aoli's customer service by streamlining the service flow to reach the service site Instantly.