Payment & Shipping Terms:
|Equipment:||Gear Type Oil Delivery Pump||Usage:||Oil Or Lowflash Liquid|
|Flow:||1.1 To 150m³/h||Discharge Pressure:||0.13 To 1.45 Mpa|
|Motor Power:||2 To 250 HP||Motor Type:||Electric And Diesel|
Simple And Compact Structure Gear Oil Pump Used In Mines Field
It can give performance as transfer pump or booster pump in oil delivery system. It can be also applied as a fuel pump for delivery system, pressurization and injection in fuel supply system and in all industry fields as lubricating pump.
KCB series gear pumps are mainly composed of gears, axles pump body, pump, cap safety valve and axle-end seals etc. The heat treated gears have the advantage of higher hardness and intensity, and rotate with the axles inside the replaceable bearing sleeves. All of pump's parts can be lubricated by delivered medium when working.
The pump is properly designed with leakage and return chute, which lets the gears bear the least torque force and reduces load and wear on bearings bear the least torque force and reduces load and wear on bearings in order to raise pump's efficiency.
It is also designed with safety valve for protection against overload. The full return flow pressure of the safety valve is 1.5times higher than the rated exhaust pressure of the pump. It can be also adjusted within the allowance of exhaust pressure range according to circumstances.
But please note the safety valve can't be applied as pressure-reducing valve for long time. You may install pressure-reducing valve separately on pipe-line if needed.
|Model||Capacity Q||Speed||Exhaust Pressure||NPSHR||Efficiency||Motor|
1. The reading of the pressure meter and vacuum gauge should be in the range of the technological parameter;
2. Check whether the gland box has leakage. According to the actual situation, tighten the packing gland; (The packing gland should not be screwed too tight in case the gland box gets heated and seal ring wears quickly.)
3. When abnormal noise occurs or the pump gets highly heated during the working, should stop it to check the problem immediately;
4. Generally, the safe valves should not be adjusted. Otherwise, use the instruments to correct it. The pressure to seal the valves of KCB‐18.3 and KCB‐33.3 is 1.7 MPa, 0.45 MPa for KCB‐55, KCB‐83.3, KCB‐300, KCB‐483.3. The pressure for three KCB‐200 are 0.45 MPa, 0.8 MPa, 1.4 MPa. The pressure for 2CY100/3, 2CY120/3, 2CY150/7 are 0.45 MPa and 0.8 MPa.
Check before starting pump
** Providing more details about your requirement such as flow, head, motor, medium and the like, you will get more correct products and price.