Payment & Shipping Terms:
|Product Type:||Single-stage Horizontal Centrifugal Pump||Usage:||Water Or Oil|
|Inlet Nominal Diameter:||DN15 To DN500mm||Outlet Nominal Diameter:||DN15 To DN500mm|
|Flow Range:||1.5 To 6230m³/h||Head Range:||3 To150m|
High Speed Single Stage centrifugal horizontal pump For Cold And Hot Water Circulation
This series is horizontal single stage end suction centrifugal pump, it transport the clean water or other liquids with similar physical and chemical properties as clear water and applicable for industrial and city water supply and drainage as well as for the agricultural irrigation and drainage.MS end suction pump designed by the performance and size according to international standard IS02858, its technique standard is close to the international standard and reach international advanced level.
1. This type centrifugal pump for conveying water or other liquids that physical and chemical properties similar to water, like industrial and urban water supply and drainage, high-rise building pressurized water, garden irrigation, fire boost, long-distance transport, HVAC refrigeration cycle, bathroom and heating equipment for pressurized water circulation, temperature <80 º C.
2. This type hot water pump is used in metallurgy, chemical industry, textile, wood processing, paper and restaurants, bathrooms, hotels and other high-temperature hot water boiler loop pressurized transport and urban housing heating circulating pump, temperature below 120 º C.
3. This type chemical pump for conveying liquids without solid particles, corrosive, viscosity similar to water, which is used in petroleum, chemical, metallurgical, power, paper, food sectors such as pharmaceuticals and synthetic fibers, temperature is -20 ~ 120 º C.
4. This type explosion-proof pumps for the transport of gasoline, kerosene, diesel and other petroleum products, medium temperature of -20 ~ + 120 º C.
5. This type stainless steel explosion-proof chemical centrifugal pump for conveying flammable and explosive chemical liquids.
6. The above model pump with low-speed motor, suitable for occasions that require low noise, and air conditioning water circulation, etc.
|Technical Parameter for ISW25-110||Rated Flow||4m³/h|
|Flow Range||2.8 to 5.2 m³/h|
|Rated Head||15 m|
|Head Range||16 to 13.5 m|
|Efficiency||34% to 41%|
|Material||Pump Casing||Cast iron or stainless steel|
|Impeller||Cast iron, stainless steel or bronze|
|Shift||45# steel,stainless steel, or bronze|
|Power supply||AC 220V - 380V, 50/60HZ|
|Service Temperature||0 to 85 Celsius degree|